Group Info

Surfaces will not be touching Joyachem with Pur Glue

This echo is caused by the two hard surfaces together which have a space between them. The noise echoes in this void. The underlay is used to prevent any echo as the two hard surfaces will not be touching with Pur Glue .

There is a wide range of underlays for use when floating the floor, all of which are adequate. A good quality underlay is advised as this ensures there is less sound echo from foot traffic. Generally the denser an underlay the less noise!

Fit a plastic DPM sheet ensuring that the edges of the membrane continue up the side of the skirting, and overlap the seams by 100mm roll out and cut in the underlay ensuring all areas of the floor are covered. Any areas left uncovered with the underlay will cause a spring in the new floor and will be noisier. A PVA adhesive is used to glue the boards together.

Fit the floor by placing two beads of adhesive along the upper and lower sides of the groove. (It is a common mistake to think that the boards need to be glued along the tongue as this will simply push the adhesive too far into the joint and not create a firm bond between the boards.) You must ensure that the beads of glue are constant and not intermittent the joints can creak if the glue line is not constant.

So that you demand a Food Packaging Glue . Often brand-new grouting is all you are required to rearrange forgotten tiling.